Search results

This paper aims to simulate the steady laminar mixed convection incompressible viscous and electrically conducting hybrid nanofluid (CuO-Cu/blood) flow near the plane stagnation-point over a horizontal porous stretching sheet along with an external magnetic field and induced magnetic field effects that can be applicable in the biomedical fields like the flow dynamics of the micro-circulatory system and especially in drug delivery.

The basic partial differential equations (PDEs) are altered to a set of dimensionless ordinary differential equations (ODEs) with the help of suitable similarity variables which are then solved numerically using bvp4c scheme from MATLAB. Inasmuch as validation results have shown a good agreement with previous reports, the present novel mass-based algorithm can be used in this problem with great confidence. Governing parameters are both nanoparticle masses, base fluid mass, empirical shape factor of both nanoparticles, suction/injection parameter, magnetic parameter, reciprocal magnetic Prandtl number, Prandtl number, heat source parameter, mixed convection parameter, permeability parameter and frequency ratio. The effect of these parameters on the flow and heat transfer characteristics of the problem is discussed in detail.

It is shown that the use of CuO and Cu hybrid nanoparticles can reduce the hemodynamics effect of the capillary relative to pure blood case. Moreover, as the imposed magnetic field enhances, the velocity of the blood decreases. Besides, when the blade shapes for both nanoparticles are taken into account, the local heat transfer rate is maximum that is also compatible with experimental observations.

An innovative mass-based model of CuO-Cu/blood hybrid nanofluid has been applied. The novel attitude to one-phase hybrid nanofluid model corresponds to considering nanoparticles mass as well as base fluid mass to computing the solid equivalent volume fraction, the solid equivalent density and also solid equivalent specific heat.

The purpose of this study is to model and solve numerically the three-dimensional off-centered stagnation point flow and heat transfer of magnesium oxide–silver/water hybrid nanofluid impinging to a spinning disk.

The applied effective thermophysical properties of hybrid nanofluid including thermal conductivity and dynamics viscosity are according to the reported experimental relations that would be expanded by a mass-based algorithm. The single phase formulations coupled with experimental-based hybrid nanofluid model is implemented to derive the governing partial differential equations which are then transferred to a set of dimensionless ordinary differential equations (ODEs) with the use of the similarity transformation method. Afterward, the reduced ODEs are solved numerically by bvp4c function from MATLAB that is a trustworthy and efficient code according to three-stage Lobatto IIIa formula.

The effect of spinning parameter and nanoparticles masses (m_MgO, m_Ag) on the hydrodynamics and thermal boundary layers behavior and also the quantities of engineering interest are presented in tabular and graphical forms. The recent work demonstrates that the analysis of flow and heat transfer becomes more complicated when there is a non-alignment between the impinging flow and the disk axes. From computational results demonstrate that, the radial and azimuthal velocities are, respectively, the increasing and decreasing functions of the disk spinning parameter. Further, for the greater values of the spinning parameter, an overshoot of the radial velocity owing to the centrifugal forces of the spinning disk is observed. Besides, the quantities of engineering interest gently enhance with first and second nanoparticle masses, while comparing their absolute values illustrates the fact that the effect of second nanoparticle mass (m_Ag) is greater. Further, it is inferred that the second nanoparticle’s mass enhancement results in the amplification of the heat transfer; although, the high skin friction and the relevant shear stress should be controlled.

The combination of experimental thermophysical properties with theoretical modeling of the problem can be the novelty of the present work. It is evident that the experimental relations of effective thermophysical properties can be trustable and flexible in the theoretical/mathematical modeling of hybrid nanofluids flows. Besides, to the best of the authors’ knowledge, no one has ever attempted to study the present problem through a mass-based model for hybrid nanofluid.

The purpose of this article is to study the steady laminar magnetohydrodynamics mixed convection stagnation-point flow of an alumina-graphene/water hybrid nanofluid with spherical nanoparticles over a vertical permeable plate with focus on dual similarity solutions.

The single-phase hybrid nanofluid modeling is based on nanoparticles and base fluid masses instead of volume fraction of first and second nanoparticles as inputs. After substituting pertinent similarity variables into the basic partial differential equations governing on the problem, the authors obtain a complicated system of nondimensional ordinary differential equations, which has non-unique solution in a certain range of the buoyancy parameter. It is worth mentioning that, the stability analysis of the solutions is also presented and it is shown that always the first solutions are stable and physically realizable.

It is proved that the magnetic parameter and the wall permeability parameter widen the range of the buoyancy parameter for which the solution exists; however, the opposite trend is valid for second nanoparticle mass. Besides, mass suction at the surface of the plate as well as magnetic parameter leads to reduce both hydrodynamic and thermal boundary layer thicknesses. Moreover, the assisting flow regime always has higher values of similarity skin friction and Nusselt number relative to opposing flow regime.

A novel mass-based model of the hybridity in nanofluids has been used to study the foregoing problem with focus on dual similarity solutions. The results of this paper are completely original and, to the best of the authors’ knowledge, the numerical results of the present paper were never published by any researcher.

The purpose of this paper is to study the steady laminar magnetohydrodynamics (MHD) flow of a magnesium oxide-silver/water hybrid nanofluid along a horizontal slim needle with thermal radiation by considering dual solutions.

It is assumed that the needle can move in the same or opposite direction of the free stream. Also the solid phase and fluid phase are in thermal equilibrium. The basic partial differential equations become dimensionless using a similarity transformation method. Moreover, problem coding is accomplished using the finite difference method. The emerging parameters are nanoparticles mass (0–40 gr), base fluid mass (100 gr), needle’s size (0.001–0.2), magnetic field parameter, velocity ratio parameter, radiation parameter and Prandtl number (6.2).

With help of the stability analysis, it is shown that always the first solutions are physically stable. Results indicate that the magnetic parameter and the second nanoparticle’s mass limit the range of the velocity ratio parameter for which the solution exists. Besides, the magnetic parameter leads to decrease of quantities of engineering interest, i.e. skin friction coefficient and local Nusselt number.

To the best of the authors’ knowledge, no one has ever attempted to study the present problem through a mass-based model for hybrid nanofluid. Moreover, the dual solutions for the problem are new. Indeed, the results of this paper are purely original and the numerical achievements were never published up to now. Finally, the authors expect that the present investigation would be useful in hot-wire anemometer or shielded thermocouple for measuring the velocity of the wind, etc.

This paper aims to model and analyze Jeffery Hamel’s channel flow with the magnetohydrodynamics second-grade hybrid nanofluid. Considering the importance of studying the velocity slip and temperature jump in the boundary conditions of the flow, which leads to results close to reality, this paper intends to analyze the mentioned topic in the convergent and divergent channels that have significant applications.

The examination is conducted on a EG-H_2 O <30%–70%> base fluid that contains hybrid nanoparticles (i.e. SWCNT-MWCNT). To ensure comprehensive results, this study also considers the effects of thermal radiation, thermal sink/source, rotating convergent-divergent channels and magnetic fields. Initially, the governing equations are formulated in cylindrical coordinates and then simplified to ordinary differential equations through appropriate transformations. These equations are solved using the Explicit Runge–Kutta numerical method, and the results are compared with previous studies for validation.

After the validation, the effect of the governing parameters on the temperature and velocity of the second-grade hybrid nanofluid has been investigated by means of various and comprehensive contours. In the following, the issue of entropy generation and its related graphical results for this problem is presented. The mentioned contours and graphs accurately display the influence of problem parameters, including velocity slip and temperature jump. Besides, when thermal radiation is introduced (Rd = +0.1 and Rd = +0.2), entropy generation in convergent-divergent channels decreases by 7% and 14%, respectively, compared to conditions without thermal radiation (Rd = 0). Conversely, increasing the thermal sink/source from 0 to 4 leads to an 8% increase in entropy generation at Q = 2 and a 17% increase at Q = 4 in both types of channels. The details of the analysis of contours and the entropy generation results are fully mentioned in the body of the paper.

There are many studies on convergent and divergent channels, but this study comprehensively investigates the effects of velocity slip and temperature jump and certainly, this geometry with the specifications presented in this paper has not been explored before. Among the other distinctive features of this paper compared to previous works, the authors can mention the presentation of velocity and temperature results in the form of contours, which makes the physical analysis of the problem simpler.

This paper aims to study numerically the flow, heat transfer, and entropy generation of aqueous copper oxide-silver hybrid nanofluid over a down-pointing rotating vertical cone, with linear surface temperature (LST) and linear surface heat flux (LSHF), in the presence of a cross-magnetic field. In industrial applications, such as oil and gas plants, food industries, steel factories and nuclear packages, the real bodies may contain nonorthogonal walls and variable cross-section three-dimensional forms which this issue can clarify the importance of selective geometry in the present research.

The mass-based scheme is accomplished for the simulation, and the entropy generation and Bejan number will be analyzed in conjunction with the aforementioned model. It has been hypothesized that two types of boundary conditions (LST and LSHF) as well as five nanoparticle shapes (sphere, brick, cylinder, platelet and disk) present a collection of crucial results. The overseeing PDEs are changed over completely to the dimensionless ODEs, and these are solved by Runge–Kutta–Fehlberg approach combined with a shooting methodology for certain values of physical parameters.

Subsequent to the fantastic compromise of the computational outcomes with past reports, the outcomes are introduced to conduct the investigation of the hydrodynamics/thermal boundary layers, the skin friction and the Nusselt number, as well as entropy generation and Bejan number. A state of hybrid nanofluid, which exhibits a remarkable increase in heat transfer in comparison to the states of mono-nanofluid and regular fluid, has been found to have the highest Nusselt number; however, the skin friction values should always be taken into account and managed. The entropy generation improves with the mass of the second nanoparticle (silver), while the opposite pattern is exhibited for the Bejan number. Furthermore, the lowest value of entropy generation number belongs to the cylindrical shape of nanoparticles in the LST case. In final, a significant accomplishment of the current study is the accurate output of the mass-based scheme for an entropy analysis problem.

To the best of the authors’ knowledge, for the first time, in this study, a new development of natural convective flow of a hybrid nanofluid about the warmed (LST and LSHF) and down-pointing rotating vertical cone by the mass-based algorithm has been presented. The applied methodology considers the masses of base fluid (water) and nanoparticles (Ag and CuO) as an alternative to the first and second nanoparticles volume fraction. Indeed, the combination use of the Tiwari–Das nanofluid model and the mass-based hybridity algorithm for the entropy generation analysis can be the main novelty of this work.

The purpose of this paper is to numerically study the unsteady double-diffusive mixed convective stagnation-point flow of a water-based nanofluid accompanied with one salt past a vertical flat plate. The effects of Brownian motion and thermophoresis parameters are also introduced through Buongiorno’s two-component nonhomogeneous equilibrium model in the governing equations.

In the present explanation of double-diffusive mixed convective model, there are four boundary layers entitled: velocity, thermal, solutal concentration and nanoparticle concentration. The resulting basic equations are solved numerically via an efficient Runge–Kutta fourth-order method with shooting technique after the governing nonlinear partial differential equations are converted into a system of nonlinear ordinary differential equations by the use of similarity transformations.

To avail the physical insight of problem, the effects of the mixed convection parameter, unsteadiness parameter and salt/nanoparticle parameters on the boundary layers behavior are investigated. Moreover, four possible types of diffusion problems entitled: double-diffusive nanofluid (DDNF), double-diffusive regular fluid (DDRF), mono-diffusive nanofluid (MDNF) and mono-diffusive regular fluid (MDRF) are considered to analyze and compare them in concepts of heat and mass transfer.

The results demonstrate that, for a regular fluid, without nanoparticle and salt (MDRF), the dimensionless heat transfer rate is smaller than other diffusion cases. As we include nanoparticle and salt (DDNF), the rate of heat transfer increases due to an increase in thermal conductivity and rate of diffusion of salt. Moreover, it is observed that the highest heat transfer rate is obtained for the situation that the thermophoretic effect of nanoparticles is negligible. Besides, the heat transfer rate enhances with the increase in the regular double-diffusive buoyancy parameter of salt.

The purpose of this paper is to study and analyze the converging/diverging channel flow and heat transfer with the multiple slips effect, which is a development of the Jeffery–Hamel problem using the mass-based hybrid nanofluid algorithm. Whereas transferring biological liquid by arteries is a vital issue, mathematical modeling of hybrid nanofluid flow containing titanium dioxide and silver as nanoparticles and blood as base liquid through a converging/diverging duct, which can be a useful analysis for the fields of drug delivery, has been investigated.

The present approach is based on the Tiwari–Das nanofluid method. In this modeling, the volume fraction of nanoparticles is replaced with nanoparticles masses. The partial differential equations of the mass, momentum and energy conservations are changed to the system of ordinary differential equations through the similarity solution method. The final governing equations are solved by Runge–Kutta–Fehlberg procedure and shooting method.

The effect of emerging parameters on the temperature, the velocity, the Nusselt number and the skin friction have been analyzed by graphical and tabular reports. It is observed that the opposition to hybrid nanofluid flow in the attendance of particles of nonspherical shapes is more enhanced than those in the attendance of particles of spherical shapes. This issue demonstrates that the rheology of a hybrid nanofluid is dependent on the shape of particles. Besides, backflow regimes form in the divergent channel for high values of Reynolds number, m₂ and a. Indeed, this modeling for the hybrid nanofluid can be useful in different technologies and industries such as biological ones. It is worth mentioning that the excellent achievement of the mass-based algorithm for heat transfer and hybrid nanofluid flow is the most important success of this study.

The main originality is related to the development of the Jeffery–Hamel problem using the mass-based hybrid nanofluid algorithm. This new mass-based method is a single-phase hybrid nanofluid approach that the inputs are masses of nanoparticles and base liquid. Besides, considering the multiple slips effect and also pure blood as base fluid in this problem are also new.

The purpose of this paper is to investigate analytically the steady general three-dimensional stagnation-point flow of an aqueous titania-copper hybrid nanofluid past a circular cylinder that has a sinusoidal radius variation.

First, the analytic modeling of hybrid nanofluid is presented, and using appropriate similarity variables, the governing equations are transformed into nonlinear ordinary differential equations in the dimensionless stream function, which is solved by the well-known function bvp4c from MATLAB.

The current solution demonstrates good agreement with those of the previously published studies in the special cases of regular fluid and nanofluids. Graphical results are presented to investigate the influences of the titania and copper nanoparticle volume fractions and also the nodal/saddle indicative parameter on flow and heat transfer characteristics. Here, the thermal characteristics of hybrid nanofluid are found to be higher in comparison to the base fluid and fluid containing single nanoparticles. An important point to note is that the developed model can be used with great confidence to study the flow and heat transfer of hybrid nanofluids.

Analytic modeling of hybrid nanofluid is the important originality of present study. Hybrid nanofluids are potential fluids that offer better heat transfer performance and thermophysical properties than convectional heat transfer fluids (oil, water and ethylene glycol) and nanofluids with single nanoparticles. In this investigation, titania (TiO₂, 50 nm), copper (Cu, 20 nm) and the hybrid of these two are separately dispersed into the water as the base fluid and analyzed.

As transferring biological fluid through an artery is nowadays a pivotal subject, the purpose of this paper is to study the mathematical model of hybrid nanofluid flow comprising pure blood as base fluid and TiO₂ and Ag as nanoparticles through the porous channel, which can be an applicable model for drug delivery.

Both walls of the channel have different permeability, which enables the fluid to enter and exit, and variable height, which dilates and squeezes at the uniform rate. By taking advantage of the similarity transformation technique, governing equations have been converted into a system of the non-linear ordinary differential equation. This problem is solved numerically by utilizing BVP4C built-in function in MATLAB software to explore the impacts of pertinent parameters.

The plots of velocity and temperature profile, normal pressure distribution and wall shear stress, as well as Nusselt number for involved parameters, are presented and the logic and physical reasons beyond them are highlighted. It has been observed that the asymmetry of the channel, caused by different permeability at walls, affects the nature of flow significantly.

To the best of the authors’ knowledge, no one has ever attempted to study the flow through a deformable porous channel with blood as a base fluid and as hybrid nanoparticles to describe medical phenomena and treatment applications. Indeed, the achievements of this paper are purely original and the numerical results were never published by any researcher.